Products | Plywood Selex | Selex Plywood Cp/C

SELEX® PLYWOOD Cp/C

Selex® Radiata Pine Plywood panels, with great dimensional stability and with excellent physical-mechanical resistance. It offers a face with a load of repaired closed defects, and a back side that accepts aesthetic defects and open defects, a condition that allows its use in construction applications.

Front
Back

Main Applications

Concrete forming

General applications for construction

Download Technical Sheet

Download Certificate

General Specifications

Dimensions (mm) 1220 x 2440 y 1220 x 2440
Thickness (mm) 6.5 9 12 15 18 21 25
Thickness (Inches) 1/4” 11/32 15/32 19/32 23/32 13/16 1”
No. of layers 3 3 5 5 6/7 7 9
Density 480 - 550 kg / m³
Sanding grain 150 grit on front and 120 grit on back
Adhesive Phenol-formaldehyde that complies with the E1 emission and CARB standard.
Moisture content Moisture content 8% to 12%
Structural certification EN 13986 (CE2 +) by HFB
Forestry certification FSC® and PEFC™ certified products

Storage Instructions

Selex® Plywood boards should be stored horizontally, on a flat surface, and in a dry and covered place, on three wooden slats.

Installation Recommendations for Construction:

Selex® Plywood must be installed leaving a gap of 3 to 4 mm in the joints between plywood sheets to absorb the dimensional variations of the wood.



Selex® Radiata Pine Plywood panels follow the highest standards of responsible forest management, thus ensuring that all raw material used comes from FSC® certified forests and other controlled sources.

When used in molding or while cutting, protect your edges with epoxy paint. A release agent is recommended.